Here’s a guide on how to defeat all the bosses in LEGO Star Wars: The Force Awakens in Story Mode. Please note that this guide doesn’t cover Free Play mode or Red Power Brick extras, and heavy enemies are excluded since they are not considered bosses.
Emperor Palpatine (The Battle of Endor)
In LEGO Star Wars: The Complete Saga, the boss fight against Palpatine involves a lightsaber duel. However, in LEGO Star Wars: The Force Awakens, the boss battle with Palpatine is quite different. You can’t approach Palpatine directly because he’ll zap you if you get too close. Instead, you must use the Force to control crane arms to damage him. Once you’ve used the Force on the crane arms, Palpatine will break them, and you’ll need to use the multi-build feature. For the X-Wing, let Luke Skywalker build on the right, and for the TIE Fighter, let Darth Vader build on the left.
After successfully using the multi-build, you’ll knock Palpatine to a lower level. At this point, Palpatine will create a barrier to protect himself, and you still can’t attack him directly. Look for additional weak spots: throw your lightsaber at the top to damage Palpatine, and then use the Force to manipulate the bombs (use Darth Vader to open the ones on the right) to inflict more damage.
But the battle isn’t over yet. Palpatine will start zapping Luke Skywalker. To rescue Luke, rapidly press the buttons to get to Palpatine. Once you’ve reached him, finish Palpatine off by throwing him into a pit.
1. First, deal with the Imperial Royal Guard before you go after Palpatine.
2. Watch out for Palpatine’s Force Lightning attack; it can be dangerous!
3. Stay away from Palpatine because he’ll zap you if you get too close.
4. Use the Force to control the crane arms and use them to damage Palpatine.
5. After using the Force on the arms, Palpatine will destroy them.
6. Use the multi-build feature to inflict more damage on Palpatine.
7. Once you’re done with the multi-build, Palpatine will create a protective barrier.
8. Be on the lookout for his building attacks and dodge them.
9. Throw your lightsaber at the top to damage Palpatine.
10. Use the Force to manipulate the bombs and cause more damage.
11. The battle continues; Palpatine will zap Luke Skywalker.
12. Rapidly press the buttons to attack Palpatine.
13. It’s time to finish him off – throw Palpatine into a pit to defeat him.
Rathtar (The Eravana)
The Rathtar is the weird boss fight if you’re at the last checkpoint on this level. You can’t get too close; you have to stay back. Maybe we should use strong attacks.
To start, wait for the Rathtar to pick up the crate, then take a precise shot at the target to make the crate explode. After that, you’ll need to go to the left and build something to move on. Once the next thing is ready, shoot at the target again.
Now, head to the right and use the crab droid to assist you. Build the crab droid and approach the Rathtar. The crab droid will damage the Rathtar, but it will get destroyed. You’ll need to find the last crate.
Shoot the final target and transform into a turret. The turret is powerful, so just keep firing at the Rathtar until it’s gone.
1. Before shooting the target on the crate, defeat the enemies around.
2. One crate is down! So, you’ll have to build more things to find the next crate.
3. After the second one, you’ll get the crab droid.
4. Rebuild the crab droid and move closer to the Rathtar to damage it.
5. The Rathtar will destroy the crab droid, but there’s only one crate left.
6. Once you’ve taken care of the last crate, it’s time to build.
7. Transform into a turret and keep shooting at the Rathtar until it’s gone.
FN-2199 (Battle of Takodana)
Now it’s time to face that stormtrooper, but this time, it’s the BOSS TROOPER!
You can’t just attack FN-2199 because he always charges at you. You have to keep jumping and rolling until he gets tired. When he’s tired, that’s when you attack him! Even if you keep attacking FN-2199, he’ll perform a slam attack, so STAY AWAY! This attack can defeat you.
You’ll need to do some multi-building because you can’t get over FN-2199. Create objects that can push him back. Once you multi-build, he’ll chase you again, so repeat the same thing!
Once FN-2199 is down to 1 heart, Finn will finish him. Rapidly press the buttons to clash with him, and you’ll be done.
1. Your regular attacks won’t defeat him quickly. You must avoid his attacks.
2. Attack FN-2199 when he’s tired, but when he’s not tired, he’ll use a slam attack. Stay out of his way!
3. You need to multi-build to make FN-2199 chase you again.
4. Spam the buttons to clash with FN-2199 once he’s down to 1 heart!
Captain Phasma (Starkiller Sabotage)
This is the only boss fight where you battle Phasma with a blaster. Phasma is up high, so you can’t aim at her. You have to be careful about her shots and explosives. After you dodge them, Phasma moves to the left and shoots projectiles rapidly. Find the weak spot and throw explosives to hurt her! Do the same thing on the right side.
Once you damage her again, Phasma brings out a turret. You still need to focus on dodging the projectiles and watch out for rockets! When the turret overheats, shoot the target to damage her!
When both targets are down, Chewbacca charges at Phasma. Mash the buttons to knock her down, and now you can control her!
1. Stay focused on avoiding Phasma’s attacks.
2. Phasma switches sides after you dodge her attacks.
3. Explode the silver thing to hurt Phasma!
4. You harm her with explosives. Now Phasma gets on the turret. Keep dodging until the turret overheats. When it does, hit the target!
5. You’ve taken out the turret. Spam the attack button to knock Phasma down!
Kylo Ren (Unmasked) – Final Boss
This is the last boss in the game. Kylo Ren wants to have a final duel with you.
You can’t hurt Ren until he’s ready to attack. Just avoid his moves until he lunges at you. Press your buttons quickly to damage Ren and repeat!
When Ren uses the force to freeze you, you can’t move. But your partner can help. Switch to your partner and use multi-build to distract Ren. This will stop the force freeze, so you can repeat the same process from before. After your attack, Ren knocks Finn’s lightsaber away. You have to use the force to give it to Rey.
You move on to the next stage. You have less space than the first one. So, keep dodging Ren’s attacks until you can hurt him. Enemies appear, so defeat them first, then repeat the process. Ren will try to freeze you again. Switch to your partner again and use a grapple on the tree where Ren is to “turn” him into a snowman. Ren runs away, and you need to catch up.
Once you’re at the final stage, you finish off Ren. Charge your lightsaber to knock Ren down, then press the attack button repeatedly to keep hitting him. This is how you defeat the last boss.
1. Dodge Ren’s attacks until he lunges at you. Press your buttons to damage him!
2. After damaging him enough, Ren uses the force to freeze you! Switch to your partner.
3. Use multi-build to distract Ren, breaking out of the force freeze with ice!
4. After damaging Ren again, he knocks Finn’s lightsaber away! Use Rey to get the lightsaber back!
5. You’re on the next stage. You have less room to dodge Ren’s attacks.
6. Stun Ren, and now it’s your chance to damage him!
7. Ren freezes you again. Switch to your partner this time!
8. Grapple the tree where Ren was and “turn” him into a snowman!
9. You’re on the final stage, approach Ren and knock him down.
10. Keep pressing the attack button on Ren, and you’ll defeat the final boss!
Dejarik Battle Bosses
In the Dejarik Battle, a boss will show up in every wave except for wave 1. When the boss appears, your goal is to defeat them!
The bosses appear in this order: Heavy Stormtrooper, Captain Phasma, HURID-327, Kylo Ren, and Rancor.
You can damage them with any move you like, so choose your best moves to defeat them.
Once you defeat the Dejarik Battle bosses, you’ll earn a nice reward!
That's everything we are sharing today for this LEGO STAR WARS: The Force Awakens guide. This guide was originally created and written by RDash75 TSS. In case we fail to update this guide, you can find the latest update by following this link.