Logic circuit to water farm field once per set interval.
Short explanation
At the beginning of farming, before you can afford sprinklers, the only reasonable way to water your crops is to run regular pipes (90s and tees) over your crop fields.
The problem is that the constantly dripping water is noisy, and if your farm is large, there could be a noticeable drop in FPS while the water is running.
The farm plots don’t really need to be watered every second, once a minute or even less is enough.
So here is a circuit that lets you set the interval with a keypad, and then drops a drop of water at that interval.
Shopping List
Here is a list of materials needed to build the circuit, all of which can be bought at the Logic Shop in Bridgepour.
- 6x straight cable
- 5x T-cable
- 3x Elbow cable
- 2x Greater Than
- 2x Valve Hook
- 1x Flip Hook
- 1x Add
- 1x Keypad
- 1x Repeater
Optionally, you can add some logic indicators to see if everything is working as it should.
The circuit
Legend:
- >= – Logic greater than
- FLIP – Logic Flip Hook
- INTERVAL – Logic Keypad
- VALVE – Logic Valve Hook
Set the desired interval in seconds on the keypad marked INTERVAL, do not forget to press the green key on the keypad after entering the number, otherwise, the number will not be sent.
The valve in the upper right corner of the picture is attached to the water supply pipe.
The two unmarked hooks facing down are two logic indicators, they are completely optional.
The strange-looking unmarked thing in the lower right corner of the picture is a logic repeater.
That's everything we are sharing today for this Hydroneer guide. This guide was originally created and written by Dingo. In case we fail to update this guide, you can find the latest update by following this link.