Vectorio – Power and Heat Management Guide

• Título: Vectorio
• Fecha de lanzamiento:
• Revelador:
• Editor:

Ver todas las guías

Information about Vectorio is still incomplete. Por favor ayúdanos a completar los detalles del juego usando esto formulario de contacto.

This guide will help you on how can you manage your heat without using too much power in Vectorio.

Heat and How to Reduce it

Primero, what is heat in this game?

Depending on the amount of heat you have, enemies will get harder and harder. You can gain heat through placing pretty much anything, from turrets to resource collectors.

How can I reduce it?

Al jugar, you will eventually unlock area coolers and area freezers. Area coolers reduce heat by 25, cost 16k gold, y 65 fuerza. Area freezers, por otro lado, reduce heat by 150, cost 100k gold, y 300 fuerza. en primer lugar, this sounds terrible, but here’s why it’s not.

Why power do they use?

Until you unlock turbines and fusion reactors, you will have a limited supply of 5k power. Sin embargo, both power sources of power will cause heat. Turbines will cause you to gain 40 calor, while fusion reactors will cause you to gain 2.5k heat. due to the amount of cost when using area freezers to lose the generated heat, fusion reactors are superior

The math

• A fusion reactor takes up 2.5k heat, igual a 17 area freezers.
• A turbine takes up 40 calor, igual a 1 area freezer.
• A fusion reactor generates 25k power.
• A turbine generates 500 fuerza.

Entonces, that means that using a fusion reactor with 17 are freezers would spend 5.1k of the fusion reactor power. Sin embargo, using a turbine with an area freezer would use 300 of the turbine power.

The math, but with area coolers

A fusion reactor takes up 2.5k heat, igual a 100 area coolers. A turbine takes up 40 calor, igual a 2 area coolers. Entonces, that means that using a fusion reactor with 100 area coolers would spend 6.5k of the fusion reactor power. Sin embargo, using a turbine with 2 area coolers would spend 130 of the generated power.