Симулятор парового двигателя – Руководство по достижениям «Демон скорости»

• Заголовок: Симулятор парового двигателя
• Дата выпуска:
• Разработчик:
• Издатель:

Просмотреть все руководства

Информация о Steam Engine Simulator пока неполная.. Пожалуйста, помогите нам заполнить детали игры, используя это контактная форма.

Achieving this is a straightforward process, although it may require some time. Simply reach a pressure of 300 пси, then proceed to open the throttle valve and patiently wait.

Руководство по достижениям «Демон скорости»

Reaching the desired pressure of 300 пси

1. Fill the tank with water (keep the L button pressed).
2. Increase the heat to 100% (нажимать 1 and use the scroll wheel).
3. Disable the relief valve (нажмите Х).
4. Deactivate the brake (нажимать 3 and use the scroll wheel).
5. Open the throttle valve by 1% (нажимать 2 and use the scroll wheel).
6. Start the engine (hold down the SPACE key). The engine should begin to rotate.
7. В этот момент, all that’s left to do is wait patiently.

Achieving a speed of 650 об/мин

Assuming you already have a pressure of 300 пси, выполните следующие действия:

1. Open the throttle valve completely (нажимать 2 and use the scroll wheel). This should result in the RPM reaching approximately 630.
2. Continuously refill the tank with water (keep the L button pressed). If you prefer not to hold L manually, you can hold it down and switch to another program or window, and the action will continue without requiring constant button presses.
3. Опционально, manually rotate the engine (hold down the SPACE key). Although it is uncertain if this step makes a difference.
4. If you have followed these instructions correctly, you will need to wait until the RPM randomly reaches 650.

In my own experience, the steam engine reached a speed of 878.5 об/мин.