The various methods for connecting a shipping container to a vehicle in Stormworks: Build and Rescue are as follows.
Electric Connectors
The most common and straightforward approach is using electrical connectors, which were the exclusive option before v1.0. At each corner of the container, there are eight electrical connectors. The lower connectors face downward and are slightly recessed, while the top ones face upward and align flush with the surface.
By sending specific composite signals to the top-side connectors, you can achieve different effects, such as toggling the connection state for the top-side or bottom connectors, or leaving them unconnected but presumably toggling both connector sets’ states.
Liny
Introduced in update v1.0, shipping containers were equipped with four rope hooks on the top face, positioned in line with the electrical connectors. While these hooks may not possess any unique functionalities, they can be utilized with a winch to raise or lower the container.
Hardpoints
With the overhaul in v1.6.13, shipping containers received additional connection options. One of these is the integration of four Hardpoint connector attachments. These consist of one topside connector, two on the bottom of each side of the container, and two on the ends. It is important to note that only the top and middle connectors provide power, while the bottom ones do not.
Dodatkowo, a Hardpoint connector body is located at the container’s very bottom, aiding in stacking multiple containers. This specific connector necessitates the activation of the bottom connectors.
Sliding Connectors
Also introduced in v1.6.13, the container received two (effectively four) sets of Sliding Connector Tracks at the bottom.
These tracks allow the container to be secured, na przykład, in a cargo bay without relying on the previously mentioned hardpoints or electric connectors.
Wniosek
Podsumowując, the choice of connection method depends on the vehicle’s unique requirements. Some may opt for electric connectors, others for hardpoints, and some might prefer using the rope anchors. Ostatecznie, what matters most is that the chosen method fulfills the specific needs of the individual user.
To wszystko, co dzisiaj udostępniamy w tym celu Burze: Buduj i ratuj przewodnik. Ten przewodnik został pierwotnie stworzony i napisany przez Grande1900. Na wypadek, gdybyśmy nie zaktualizowali tego przewodnika, możesz znaleźć najnowszą aktualizację, postępując zgodnie z tym połączyć.