Brick Odyssey – How to Control the Board

Study the board before fights

At the beginning of any fight, you have unlimited time to look at the board. Once you press SPACE, your ball spawns and so do enemies and the fight begins.

If you don’t launch your ball in 5 seconden, it will automatically fire off your paddle. This is a very short span of time but it actually feels longer because the game is so fast-paced.

This means you should use the time BEFORE the fight (before you press space) to study the board configuration so that you can see which bricks to hit and which to avoid, as well as where your upgrades are located before the board refreshes.

You should also use this time to read the screen, especially the information on the fight that’s on the right side of the screen. Here’s what it says on the Hydra at Storm Level 15 Bijvoorbeeld:

The game tells you that if you hit the first bricks you will reduce the Hydra’s max HP (good and proper method of killing the Hydra), and if you hit the poison droplet bricks the Hydra will send an additional attack (bad).

Read this information before fights start, especially when it’s your first time playing! Many new players don’t look at it and lose their run because they don’t realise the mechanics of the fights they get into.

Your most important ally is tijd! Once the fight starts, it has to end in two ways: either you die, or the enemy dies. There’s no way to slow down fights or get a breather once it starts. Get all the time you can before the fight!

How the ball moves

One thing that seems to confuse people when they start out the game is understanding how the ball moves on the board.

It does not move like you’d typically expect a ball to move in a breakout game, but you can actually use this to your advantage once you get used to it.

The game explains in a tip (they appear before fights start):

“The ball always bounces in the direction away from the center of the brick it hits”

This means that the ball (and multiballs, which are the smaller ones that sometimes appear depending on your relics or brick upgrades) will go UP if it hits the upper portion of a vertical brick.

Another example: the ball will go LEFT if it hits a horizontal brick on its left side.

The angle at which the ball bounces off bricks is determined by the distance from the center.

This is not included in the tip, but it works exactly the same way on the paddle(S).

The ball is not affected by gravity and will sometimes (often) move erratically. Echter, with experience, you’ll quickly learn to predict the movements and will see patterns emerge.

Bijvoorbeeld, it’s very difficult to get the ball to start combos — dat is, get stuck between a row or line of bricks and bounce off each other. It will often come back down to the paddle, so you can’t rely on passive moments to do the work for you.

Another pattern you’ll see often is that the ball comes crashing down at a very soft angle, which makes it almost impossible to catch it with your paddle because it can only go so fast. In dit geval, it’s better to use a recall with CTRL — more on recalls in the next section.

(The developer also told me that he had tried a more conventional breakout ball movement but it made the game too easy, this system is more challenging and I tend to agree).

Use recalls

You can use recalls twice per refresh, but this is only the default setting which can be changed by your relics and character.

Recalls are used with the CTRL key and will bring the ball back to your paddle so that you can launch it again.

Recalls are actually very important and new players tend to forget they exist. Every time you don’t catch the ball and it falls below the board, you lose 10 HP. Recalls can also get you out of a tight situation, for example if you’re going to be hitting a brick that will damage you (as seen in some elite and boss fights) or it takes too long to come back to your paddle.

The best time to use a recall in my opinion is as soon as it will be useful. You only get 1 per refresh, and sometimes refreshes can take a while to trigger, but there’s no point holding on to your recall if it can be useful because you’ll get it back eventually.

When you launch the ball, it goes up in a straight ball (but you can control this as well, we’ll see in the next section). This means you can also use recalls to snipe bricks that you need to destroy. Bijvoorbeeld, it’s possible to snipe the hydra bricks in the first boss fight if they’re exposed and you use a recall.

One way to bypass the recall limit is by having relics that lower your refresh threshold or upgrade your recall limit, which can get OP. But you can also let the ball fall and take the 10 HP damage and it will work like a recall.

Control the paddle launch angle

You can actually control the initial launch angle of the ball by using the keyboard. This is not very well-known and I found out by pure luck the first time.

When the ball is on the paddle waiting for you to launch it, if you don’t move when you press SPACE to launch the ball, it will go straight up in a 90° angle.

If you are moving left or right, it will launch the ball in a 45° angle in the direction you are moving.

If you keep SHIFT pressed while moving the paddle, you will move very slowly and the ball will launch at approximately a 10-15° angle for more precise controlling.

Going up in a 90° angle is actually rarely useful, unless you want to snipe a specific brick. The reason for this is that if you hit the ceiling at a precise 90° angle, the ball will come straight back down onto your paddle and you will lose time for nothing. Essentially you’ve wasted a cycle not hitting anything.

Using angles when launching the paddle is preferred as it can help you get it in hard to reach places to try and get a combo going.

Understanding board refreshes

Once you’ve destroyed a certain number of bricks (decided per fight, per Storm Level, en per relikwieën en andere upgrades), Het bord wordt automatisch vernieuwd en u krijgt uw terugroepacties terug.

Het vernieuwen van het bord betekent dat het alle vernietigde en beschadigde bakstenen tot volledige gezondheid terugbrengt en uw bakstenen upgrades weer op het bord in willekeurige stenen zal plaatsen.

Vernieuwingen kunnen niet direct worden geregeld, Ze zullen gebeuren zodra de drempel is bereikt. Je kunt de drempel zien en hoeveel stenen je nog moet breken aan de rechterkant van het scherm tijdens een gevecht.

Vernieuwingen zijn over het algemeen goed, Hoewel ze soms kunnen voorkomen dat je een baksteen raakt, zou je slaan en wilde slaan als het bord leeg wordt. Een baksteen kan op je bal spawnen waardoor je ermee raakt.

Omdat je aanvalt elke keer dat je een baksteen breekt, Vernieuwingen zijn belangrijk om te winnen en het is een haalbare strategie om verversingsdrempels te vergroten wanneer u kunt met upgrades.

Eigenlijk, Iets dat vaak over het hoofd wordt gezien door nieuwe spelers is dat de handelaar (Gouden munten pictogram op de kaart) kan u een upgrade verkopen om de vernieuwingsdrempel te vergroten, Het ligt aan de rechterkant van het scherm en kosten 15 goud.

[[Het vergroten van uw vernieuwingsdrempel kan meer waardevol zijn voor bepaalde gevechten meer dan andere]

[Kijk er zo naar : Als je je concentreert op het vernietigen van alle verbeterde bakstenen bij elke verversing, De vernieuwingsdrempel bepaalt het aantal zwakke onverwachte bakstenen die je moet vernietigen voordat alle coole verbeterde stenen weer verschijnen. Hoe hoger de drempel, hoe meer opgewaardeerde bakstenen er zijn]]

Het in de gaten houden van de vernieuwingen is niet verplicht om te winnen op lagere stormniveaus, Maar het is belangrijk om het in de gaten te houden om je tactiek te plannen tijdens een gevecht.