콘텐츠로 건너뛰기
라이엇 비트

라이엇 비트

  • 집
  • 소식
  • 가이드
  • 비디오 가이드
  • 패치 노트
  • 남용 신고
  • 검색 양식 전환

Tunnet – Complete Puzzle Solutions Guide

에 게시됨 02/02/202402/02/2024 에 의해 Daddy 코멘트 없음 ~에 Tunnet – Complete Puzzle Solutions Guide
  • 제목: Tunnet
  • 출시일: 12월 1, 2023
  • 개발자: puzzled_squid
  • 발행자: puzzled_squid

This guide will show you the complete puzzle solutions in Tunnet. These puzzles include the 4 puzzle chambers and Headquarters. This information clearly contains spoilers for the four logic puzzles and the boss chamber. 하지만, to make this resource also helpful, I’ve organized separate solution and map sections for each subheading.

Chamber 4

해결책

  • Set it up like this. 솔직히 말하자면, it’s not much of a puzzle if you’ve used splitters before.

Chamber 3

해결책

  • To make things simple, start from the end. The first device you connect is always in port 0. Choose which line is your “~에” and which is your “밖으로”. 그 다음에, add repeaters between them, beginning from the end. Make sure port 0 is where you want it. 이후, add your splitters. If you want an easier way, just use repeaters and don’t connect to the filters at all. But be aware, this might be a mistake in the design and could be fixed later.

Chamber 2

해결책

  • This puzzle is all about figuring out the paths. Set it up like this.

Chamber 1

해결책

  • This puzzle is about making a device that works like a traffic cop. You need to separate the lines coming in and going out. On the incoming line, create groups of filters, each group for a certain range of addresses.

본부

해결책

  • Two rooms, labeled 13 그리고 11, begin locked and get unlocked in the first step. I suggest guiding the wires through rooms (2,1) 그리고 (2,3) initially and avoiding further adjustments, as these rooms keep refilling and can cause navigation challenges.

Detail Steps

  • Adjust the rotations for each splitter as indicated. In room (1,1), set the rightmost splitter’s rotation according to the red line.
  • Make a packet travel from 00 > 10 > 12 > 00. 이를 달성하려면, route 10 through a new wire between rooms (3,3) 그리고 (1,2). It might be faster than using existing wires.
  • Sequentially connect all EPs in this order: 00 > 10 > 00 > 11 > 00 > 12 > 00 > 13 > 00. Pause the network, disconnect the recently added red line, introduce a splitter in room (1,3), and modify the rotation of the rightmost splitter in room (1,1) to match the purple line.

이것이 오늘 우리가 공유하는 모든 것입니다. Tunnet 가이드. 이 가이드는 원래 작성자가 작성하고 작성했습니다. Daddy. 이 가이드를 업데이트하지 못한 경우, 다음을 수행하여 최신 업데이트를 찾을 수 있습니다. 링크.

이 사이트의 콘텐츠가 귀하의 권리를 침해한다고 생각하는 경우, 귀하의 지적 재산권을 포함하여, 문의 양식을 사용하여 즉시 문의하십시오..
가이드 태그:Tunnet

탐색 후

이전 게시물: 지오메트리 대시 – Building Editor Tips and Tricks
다음 게시물: Enshrouded – How to Get Endgame Gear Early

답장을 남겨주세요 답장 취소

귀하의 이메일 주소는 공개되지 않습니다. 필수 입력란이 표시되어 있습니다 *

  • 제목: Tunnet
  • 출시일: 12월 1, 2023
  • 개발자: puzzled_squid
  • 발행자: puzzled_squid

부인 성명

인용된 모든 콘텐츠는 해당 소스에서 파생됩니다.. 귀하의 콘텐츠를 허가 없이 사용했다고 생각되는 경우, 우리에게 연락하면 진지하게 받아 들일 것입니다..
  • 회사 소개
  • 문의하기
  • 개인 정보 정책
  • 서비스 약관

저작권 © 2025 라이엇 비트.

에 의해 구동 프레스북 뉴스 WordPress 테마