콘텐츠로 건너뛰기
라이엇 비트

라이엇 비트

  • 집
  • 소식
  • 가이드
  • 비디오 가이드
  • 패치 노트
  • 남용 신고
  • 검색 양식 전환
하드스페이스: 선박파괴자

하드스페이스: 선박파괴자 – 물고기 머리 인양 (고등어)

에 게시됨 06/29/202106/29/2021 에 의해 Blu 코멘트 없음 ~에 하드스페이스: 선박파괴자 – 물고기 머리 인양 (고등어)
  • 제목: 하드스페이스: 선박파괴자
  • 출시일:
  • 개발자:
  • 발행자:
Information about Hardspace: Shipbreaker is still incomplete. 이것을 사용하여 게임의 세부 정보를 입력할 수 있도록 도와주세요. 문의 양식.

Fish heads are difficult to salvage because of the composition of materials. The interior panels are made of aluminum (노) while the frame and outer panel are made of Nanocarbon (processor). To salvage it, you must separate the aluminum panels from the Nanocarbon framing, but there is no clear way to detach it. The purpose of this guide is to explain how to properly salvage these Fish Heads.

What is a Fish Head?

가장 먼저, what are “Fish Heads”? Fish Heads are basically the cockpits of the ships, in this case Mackerels. I chose to give them this name because they are like actual Fish Heads, meant to be cut off from the rest of the ship and hard to salvage.

Before Salvaging a Fish Head

There are a few things you should do before breaking apart these Fish Heads:

  • Remove all valuable items like storage bins, seats, lights and computer terminals and put them in the barge.
  • Carefully cut out the glass window on the front and place it in the furnace, you can use the gap to remove valuable items.
  • Separate the Fish Head from the rest of the ship by cutting the yellow cut points.
  • Separate the two other nanocarbon panels from either side of the Fish Head.

Salvaging the Fish Head

To successfully salvage a Fish Head, you should follow these steps:

단계 1: Use the scanner (티) to locate 8 aluminum bars in between the interior panels, should be colored in light blue.

단계 2: Use the cutter in precision mode(used for cutting yellow cut points) to destroy the aluminum structure inbetween the interior panels. Position yourself so you are looking into the gap between the nanocarbon outer panel and the outside of the interior plating, this gap is present on the upper and lower half of the Fish Head.

단계 3: Cut all 8 aluminum structural beams until all interior panels are separated from the nanocarbon frame. They should pop out or become loose once separated completely.

단계 4: Now that all interior panels are separated, you can pull them away from the nanocarbon frame and put them into the furnace, and the nanocarbon into the processor.

축하해요, you have successfully salvaged a Fish Head and have gained every dime you can get out of it. You can repeat these steps for every Mackerel you claim and salvage. I hope this guide has been helpful. Happy Cutting!

이것이 오늘 우리가 공유하는 모든 것입니다. 하드스페이스: 선박파괴자 가이드. 이 가이드는 원래 작성자가 작성하고 작성했습니다. Blu. 이 가이드를 업데이트하지 못한 경우, 다음을 수행하여 최신 업데이트를 찾을 수 있습니다. 링크.

이 사이트의 콘텐츠가 귀하의 권리를 침해한다고 생각하는 경우, 귀하의 지적 재산권을 포함하여, 문의 양식을 사용하여 즉시 문의하십시오..
가이드 태그:하드스페이스: 선박파괴자

탐색 후

이전 게시물: 파라다이스 정욕 – 캐스의 퀘스트 가이드
다음 게시물: 거위 거위 오리 – All Roles and Descriptions

답장을 남겨주세요 답장 취소

귀하의 이메일 주소는 공개되지 않습니다. 필수 입력란이 표시되어 있습니다 *

  • 제목: 하드스페이스: 선박파괴자
  • 출시일:
  • 개발자:
  • 발행자:
Information about Hardspace: Shipbreaker is still incomplete. 이것을 사용하여 게임의 세부 정보를 입력할 수 있도록 도와주세요. 문의 양식.

부인 성명

인용된 모든 콘텐츠는 해당 소스에서 파생됩니다.. 귀하의 콘텐츠를 허가 없이 사용했다고 생각되는 경우, 우리에게 연락하면 진지하게 받아 들일 것입니다..
  • 회사 소개
  • 문의하기
  • 개인 정보 정책
  • 서비스 약관

저작권 © 2025 라이엇 비트.

에 의해 구동 프레스북 뉴스 WordPress 테마