تخطى الى المحتوى
أعمال الشغب

أعمال الشغب

  • بيت
  • أخبار
  • خطوط إرشاد
  • أدلة الفيديو
  • ملاحظات التصحيح
  • بلغ عن سوء معاملة
  • تبديل شكل البحث

Tunnet – Complete Puzzle Solutions Guide

نشر على 02/02/202402/02/2024 بواسطة Daddy لا تعليقات على Tunnet – Complete Puzzle Solutions Guide
  • عنوان: Tunnet
  • تاريخ الافراج عنه: ديسمبر 1, 2023
  • المطور: puzzled_squid
  • الناشر: puzzled_squid

This guide will show you the complete puzzle solutions in Tunnet. These puzzles include the 4 puzzle chambers and Headquarters. This information clearly contains spoilers for the four logic puzzles and the boss chamber. لكن, to make this resource also helpful, I’ve organized separate solution and map sections for each subheading.

Chamber 4

حل

  • Set it up like this. To be honest, it’s not much of a puzzle if you’ve used splitters before.

Chamber 3

حل

  • To make things simple, start from the end. The first device you connect is always in port 0. Choose which line is your “في” and which is your “out”. ثم, add repeaters between them, beginning from the end. Make sure port 0 is where you want it. بعد ذلك, add your splitters. If you want an easier way, just use repeaters and don’t connect to the filters at all. But be aware, this might be a mistake in the design and could be fixed later.

Chamber 2

حل

  • This puzzle is all about figuring out the paths. Set it up like this.

Chamber 1

حل

  • This puzzle is about making a device that works like a traffic cop. You need to separate the lines coming in and going out. On the incoming line, create groups of filters, each group for a certain range of addresses.

Headquarters

حل

  • Two rooms, labeled 13 و 11, begin locked and get unlocked in the first step. I suggest guiding the wires through rooms (2,1) و (2,3) initially and avoiding further adjustments, as these rooms keep refilling and can cause navigation challenges.

Detail Steps

  • Adjust the rotations for each splitter as indicated. In room (1,1), set the rightmost splitter’s rotation according to the red line.
  • Make a packet travel from 00 > 10 > 12 > 00. To achieve this, route 10 through a new wire between rooms (3,3) و (1,2). It might be faster than using existing wires.
  • Sequentially connect all EPs in this order: 00 > 10 > 00 > 11 > 00 > 12 > 00 > 13 > 00. Pause the network, disconnect the recently added red line, introduce a splitter in room (1,3), and modify the rotation of the rightmost splitter in room (1,1) to match the purple line.

هذا كل ما نشاركه اليوم من أجل هذا Tunnet مرشد. تم إنشاء هذا الدليل وكتابته في الأصل بواسطة Daddy. في حالة فشلنا في تحديث هذا الدليل, يمكنك العثور على آخر تحديث باتباع هذا وصلة.

إذا كنت تعتقد أن أيًا من محتويات هذا الموقع ينتهك حقوقك, بما في ذلك حقوق الملكية الفكرية الخاصة بك, يرجى الاتصال بنا على الفور باستخدام نموذج الاتصال الخاص بنا.
خطوط إرشاد العلامات:Tunnet

آخر الملاحة

المنشور السابق: داش الهندسة – Building Editor Tips and Tricks
المشاركة التالية: Enshrouded – How to Get Endgame Gear Early

ترك الرد إلغاء الرد

لن يتم نشر عنوان بريدك الإلكتروني. تم وضع علامة على الحقول المطلوبة *

  • عنوان: Tunnet
  • تاريخ الافراج عنه: ديسمبر 1, 2023
  • المطور: puzzled_squid
  • الناشر: puzzled_squid

تنصل

ويستمد كل محتوى استشهد من مصادرها الخاصة. إذا كنت تعتقد أننا استخدمنا المحتوى الخاص بك دون إذن, تأكد من الوصول إلينا وسنأخذ الأمر على محمل الجد.
  • معلومات عنا
  • اتصل بنا
  • سياسة الخصوصية
  • شروط الخدمة

حقوق النشر © 2025 أعمال الشغب.

مشغل بواسطة PressBook News وورد موضوع