محاكاة محرك البخار – دليل إنجاز سرعة شيطان

• عنوان: محاكاة محرك البخار
• تاريخ الافراج عنه:
• المطور:
• الناشر:

عرض جميع الأدلة

Information about Steam Engine Simulator is still incomplete. الرجاء مساعدتنا في ملء تفاصيل اللعبة باستخدام هذا نموذج الاتصال.

Achieving this is a straightforward process, although it may require some time. Simply reach a pressure of 300 PSI, then proceed to open the throttle valve and patiently wait.

دليل إنجاز سرعة شيطان

Reaching the desired pressure of 300 PSI

1. Fill the tank with water (keep the L button pressed).
2. Increase the heat to 100% (press 1 and use the scroll wheel).
3. Disable the relief valve (press X).
4. Deactivate the brake (press 3 and use the scroll wheel).
5. Open the throttle valve by 1% (press 2 and use the scroll wheel).
6. Start the engine (hold down the SPACE key). The engine should begin to rotate.
7. عند هذه النقطة, all that’s left to do is wait patiently.

Achieving a speed of 650 RPM

Assuming you already have a pressure of 300 PSI, اتبع هذه الخطوات:

1. Open the throttle valve completely (press 2 and use the scroll wheel). This should result in the RPM reaching approximately 630.
2. Continuously refill the tank with water (keep the L button pressed). If you prefer not to hold L manually, you can hold it down and switch to another program or window, and the action will continue without requiring constant button presses.
3. اختياريا, manually rotate the engine (hold down the SPACE key). Although it is uncertain if this step makes a difference.
4. If you have followed these instructions correctly, you will need to wait until the RPM randomly reaches 650.

In my own experience, the steam engine reached a speed of 878.5 RPM.