This guide explains how anyone, no matter their experience level, can install ship modules that are currently marked as “unavailable” (grayed out) because of additional requirements.
ملحوظات
يتذكر, for this to be successful, you still need to meet the Space Ship class requirements for modules. على سبيل المثال, you can’t install a Class B module if you have a Class A Reactor, and so on.
Keep an eye on your “Flight Check” messages located at the bottom right corner in the ship builder window if you encounter any issues.
Don’t forget to register your ship if you want to make modifications to it.
Certain modules may only become available once you reach a particular level.
To gain access to certain modules, you may need to visit specific ship technicians.
How to Install Unavailable Space Ship Modules
في هذا الدليل, we will switch the Shield module from Class B “Starship Design (رتبة 2)” to Class B, but now it needs “Starship Design (رتبة 3),” which I don’t have yet.
خطوة 1: أولاً, check the equipment list for the ship module you want to put in. I want to add the “Osiris 2030-B Shield Generator,” but it needs “Starship Design (رتبة 3),” and I don’t have that yet.
خطوة 2: التالي, pick any other module you can choose (that you meet the requirements for). Position the camera or view of the spaceship so that the selected module appears red (it doesn’t attach to anything). يضعط “ه” on PC to select the module, but don’t attach or place it anywhere. Make sure you can still move the module around freely.
خطوة 3: الآن, استخدام “W” أو “س” on PC, scroll through the different modules to find the one you want.
خطوة 4: Once you locate the module you desire, left-click to select or snap it into place. You can also press “ض” on PC to switch between selected module installation configurations (port/starboard & forward/backward).
هذا كل ما نشاركه اليوم من أجل هذا ستارفيلد مرشد. تم إنشاء هذا الدليل وكتابته في الأصل بواسطة Orgar. في حالة فشلنا في تحديث هذا الدليل, يمكنك العثور على آخر تحديث باتباع هذا وصلة.