SpongeBob SquarePants The Cosmic Shake – Adjusting the Graphics Quality and Vsync Fix

For those PC players who are suffering from technical issues or want to change their graphical settings, here is how you fix them.

Graphics Quality Edit

Press Win+R and paste this into the search bar: %LOCALAPPDATA%

Click \Cosmicshake\Saved\Config\WindowsNoEditor

After clicking on “WindowsNoEditor” انقر فوق “GameUserSettings” file and from there you can edit the graphical output for your game.

It should look like this for the graphical section:

[ScalabilityGroups]
sg.ResolutionQuality=100.000000
sg.ViewDistanceQuality=3
sg.AntiAliasingQuality=3
sg.ShadowQuality=3
sg.PostProcessQuality=3
sg.TextureQuality=3
sg.EffectsQuality=3
sg.FoliageQuality=3
sg.ShadingQuality=3

Change the “sg.ResolutionQuality” to a lower number if you wish to lower the resolution scale and receive a better framerate and the other settings can be lowered as well if you so wish to do so.

(Ex. sg.ViewDistanceQuality=1
where 1 = low
و 3 = high)

V-Sync Fix

Is your VSync glitching out?

Going through the same file again, scroll down until you see “FrameRateLimit=00.000000”.

Change the first “0” to a 6 so it reads “60.000000”. This will change the framerate limit to 60 and will give the V-sync an actual number to sync your monitor/game too. If you have a more powerful PC just change the number to a higher one such as “120.000000” or so to match your monitor (If your monitor can do 120hz, إلخ.).

After changing what you want in the file, save it and then right-click the file and go to “properties”. انقر “Read-only” واضغط “apply”. You should now be able to start the game with the changes in mind.

If you want to change the settings again, unclick the “read-only” box, press “apply” مرة أخرى, and then make your changes. Just don’t forget to do the process again once you are done.