تخطى الى المحتوى
أعمال الشغب

أعمال الشغب

  • بيت
  • أخبار
  • خطوط إرشاد
  • أدلة الفيديو
  • ملاحظات التصحيح
  • بلغ عن سوء معاملة
  • تبديل شكل البحث

Nuclear War Simulator – How to Create Your Own Units

نشر على 02/21/2023 بواسطة Coiler12 لا تعليقات على Nuclear War Simulator – How to Create Your Own Units
  • عنوان: Nuclear War Simulator
  • تاريخ الافراج عنه:
  • المطور:
  • الناشر:
Information about Nuclear War Simulator is still incomplete. الرجاء مساعدتنا في ملء تفاصيل اللعبة باستخدام هذا نموذج الاتصال.

This is a guide to making different and plausible custom units, be they bombers or missiles.

مقدمة

Nuclear War Simulator has an excellent “blueprints” systems that allows players to make devices not included in the vanilla game. Everything from classic historical systems like the SS-20 to weird and crazy wonder-weapons can be made in it. This guide is to show how to use plausible numbers when making such devices.

Warheads

اه, warheads. Also known as “physics packages”, these are the building blocks of all nuclear weapons. They contain highly enriched uranium, plutonium, أو كليهما. The primary sources for this section are the 2013 Global Fissile Material Report by the International Panel on Fissile Materials and the 1995 paper “The Amount of Plutonium and Highly Enriched Uranium Needed For Pure Fission Weapons” by Thomas Cochran and Christopher Paine.

Some nuclear warheads have known (or at least stated in public sources) fissile material qualities. Little Boy, a uranium-hungry gun type, had 64 kilograms of uranium in it. Fat Man, a plutonium implosion type, had 6.2 kilograms of plutonium but a similar yield, showing the greater efficiency of implosion designs.

Other stated designs of note:
South African 20 kiloton gun-type: 56 kilograms HEU
W47 600-1200 kiloton thermonuclear used in Polaris submarine missile: 2.5 kilograms plutonium and 60 kilograms HEU
RDS-4 1950s 25 Kiloton Soviet Bomb: 4.2 kilograms plutonium, 6.8 kilograms HEU
RDS-5 1950s 5-9 Kiloton Soviet Bomb: 2 kilograms Plutonium
Orange Herald 1950s British 720 kiloton fission weapon: 117 kilograms HEU
Mark 18 Nuclear Bomb, 1950s American 500 kiloton fission weapon: 60 kilograms HEU

(1 kilogram = 2.2 pounds)

ال 2013 GFMR has this section on representative material requirements:

This should be sufficient for warheads specifically based on a historical type.

Now for the fun part: The Cochran/Paine paper has these tables theorized for what a nuclear nation with “low”, “medium”, أو “high” technology would need for a bomb of a yield equal to or less than Fat Man/Little Boy. This is particularly relevant for countries that don’t have a nuclear program in real life but are given a hypothetical arsenal in-game.

It also has these expanded tables for estimating what kind of yields would be obtained through using more materials, either HEU or PU:

The next step (besides the arbitrary “reliability”, use whatever you feel like there) is fission fraction: Generally speaking, pure fission bombs will obviously have a fission fraction of 100%, boosted fission has a small fusion reaction that can be represented as only 95-98% fission, most thermonuclear warheads have 50% fission, and extremely large fusion warheads have them in the single digits (the Tsar Bomba had only around 3% fission)

In gameplay terms, fission fraction determines the amount of fallout the bomb generates when close enough to the ground. An ahistorical but theorized “clean” warhead with no fallout can be made using a fission fraction of 0%. على نفس المنوال, a dirty bomb can be made by increasing the fission fraction beyond its historical norm like using a 90-100% fission fraction for a salted multi-megaton thermonuclear warhead.

Gravity Bombs

Gravity bombs are pretty self-explanatory. Their CEP (circular error probable) can be adjusted beyond the game’s good default of 300 meters in either direction. Lower simulates a better-aimed/guided bomb while higher the reverse, like a bomb dropped from high speed and altitude or with a less capable bombsight (the Mach 3 B-70 Valkyrie had a target CEP of 1.5 كيلومترات, على سبيل المثال)

Slowing bomb fall speed is used to simulate a parachute slowed bomb, as most early nukes were. This gives the dropping plane more time to escape, a necessity when dealing with truly monstrous devices.

Cruise Missiles

Cruise missiles need a speed in meters per second (there are many good converters out on the internet), a target altitude (most fly either very high or very low to avoid interception) and range in meters (so multiply by a thousand to get a range in kilometers)

Historical CEP ranges from 11 kilometers for World War II era V-1s (better hope the warhead or target is big) ل 3-5 kilometers for early Cold War guided missiles like the AGM-28 Hound Dog to single digit meters for modern precision missiles.

Ballistic Missiles

Ballistic missiles are also pretty self-explanatory, although they have the ability to carry MIRVs, or multiple warheads. Ranges can be pretty easily found for existing missiles.

Speculated ballistic missile accuracy levels:

  • World War II V-2: 6-12 كيلومترات
  • Early Cold War ICBM (Atlas/R-7): 3.7-5 كيلومترات
  • Early Cold War theater missiles (Redstone, Scud A): 300-1000 متر
  • Modern ICBMs: 90-300 meters per warhead

If you want to go really crazy with your ballistic missiles, there are a pair of online calculators. One is good for theater missiles limited by size and helps determine range. The other is good for ICBMs and determines payload (just view it as slightly to somewhat higher than the LEO setting), good for seeing how good a “package” or how many MIRVs it can carry.

Patarames Ballistic Missile Calculator, good for theater missiles and range
Launcher Calculator, good for ICBM payload.

For the Launcher Calculator, either solid or a non-LOX storable liquid fuel is needed for a viable ballistic missile.

Delivery Platforms

Both cruise and ballistic missiles can be carried on submarines, surface ships, in missile silos, aircraft (even ICBMs!), or in mobile transporter-erector-launcher vehicles (or TELs). The defaults are pretty good for just getting a platform into the game, but I still have a bit of advice for customization.

  • You need bases for these. Airbases for bombers, mobile bases for TELs, silo control centers for fixed installations, and sub bases/ports for submarines and ships.
  • The pressure resistance settings can be changed for different types of launchers, especially silos. Soft launch pads can be simulated by “silos” with very low resistance, and the resistance can be increased for super-hardened silos carved out of mountains (which was actually proposed.
  • For aircraft, it’s important to have a range that’s twice the distance to the intended maximum target, as the range in-game simulates the trip there and back.

هذا كل ما نشاركه اليوم من أجل هذا Nuclear War Simulator مرشد. تم إنشاء هذا الدليل وكتابته في الأصل بواسطة Coiler12. في حالة فشلنا في تحديث هذا الدليل, يمكنك العثور على آخر تحديث باتباع هذا وصلة.

إذا كنت تعتقد أن أيًا من محتويات هذا الموقع ينتهك حقوقك, بما في ذلك حقوق الملكية الفكرية الخاصة بك, يرجى الاتصال بنا على الفور باستخدام نموذج الاتصال الخاص بنا.
خطوط إرشاد العلامات:Nuclear War Simulator

آخر الملاحة

المنشور السابق: How to Fix Nuclear War Simulator FPS Drop, تأخر, وقضايا التأتأة
المشاركة التالية: How to Fix The Warlock of Firetop Mountain Crashing, تحطم عند الإطلاق, وقضايا التجميد

ترك الرد إلغاء الرد

لن يتم نشر عنوان بريدك الإلكتروني. تم وضع علامة على الحقول المطلوبة *

  • عنوان: Nuclear War Simulator
  • تاريخ الافراج عنه:
  • المطور:
  • الناشر:
Information about Nuclear War Simulator is still incomplete. الرجاء مساعدتنا في ملء تفاصيل اللعبة باستخدام هذا نموذج الاتصال.

تنصل

ويستمد كل محتوى استشهد من مصادرها الخاصة. إذا كنت تعتقد أننا استخدمنا المحتوى الخاص بك دون إذن, تأكد من الوصول إلينا وسنأخذ الأمر على محمل الجد.
  • معلومات عنا
  • اتصل بنا
  • سياسة الخصوصية
  • شروط الخدمة

حقوق النشر © 2025 أعمال الشغب.

مشغل بواسطة PressBook News وورد موضوع